Tp Link Tl Wr841n Manual Cz

• Contents
• Table of Contents
• Bookmarks

  Also Run into for TP-Link TL-WR841N

  Related Manuals for TP-Link TL-WR841N

  Summary of Contents for TP-Link TL-WR841N

• Page i TL-WR841N TL-WR841ND 300Mbps Wireless N Router REV four.1.1 1910011002...
• Page ii Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their corresponding holders. No part of the specifications may exist reproduced in any form or past whatever means or used to brand any derivative such every bit translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

• Folio 3: Fcc Argument

  FCC STATEMENT This equipment has been tested and found to comply with the limits for a Form B digital device, pursuant to part xv of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accord with the instructions, may cause harmful interference to radio communications.

• Folio 4: Ce Mark Warning

  separation distance of at to the lowest degree twenty cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter." CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
• Page 5 Korea Warning Statements 당해 무선설비는 운용중 전파혼신 가능성이 있음. NCC Observe & BSMI Discover 注意！ 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機， 非經許可， 公司、 商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性或功能。 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行； 經發現有干擾現象時， 應立即 停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射 頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。 減少電磁波影響，請妥適使用。 安全諮詢及注意事項 ●請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 ●清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 ●注意防潮，請勿將水或其他液體潑灑到本產品上。  ●插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 ●請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 ●請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних...

• Folio 6: Condom Data

  Safety Information When production has power push, the power button is 1 of the way to shut off the product; when there is no ability button, the only mode to completely shut off power is to disconnect the production or the power adapter from the power source. Don't detach the product, or make repairs yourself.

• Folio 7: Proclamation Of Conformity

  TP-LINK TECHNOLOGIES CO., LTD Annunciation OF CONFORMITY For the following equipment: Product Description: 300Mbps Wireless N Router Model No.: TL-WR841N/TL-WR841ND Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:...

• Page eight: Table Of Contents

  CONTENTS Packet Contents.....................1 Chapter 1. Introduction..................2 ane.1 Overview of the Router....................two 1.2 Conventions ....................... iii i.3 Main Features ......................three 1.4 Panel Layout ......................iv 1.4.1 The Front Panel....................four 1.4.two The Rear Panel ....................v Chapter ii. Connecting the Router ...............vii 2.1 Arrangement Requirements ....................
• Page ix 4.7.2 DHCP Client List................... 47 four.7.3 Address Reservation ..................47 4.8 Forwarding ....................... 49 four.8.one Virtual Servers ....................49 4.8.2 Port Triggering ....................51 4.8.3 DMZ......................52 four.8.4 UPnP ......................53 iv.9 Security ........................54 iv.9.i Bones Security....................54 4.9.two Advanced Security..................56 4.ix.3 Local Direction ..................
• Page 10 iv.16.five Backup & Restore..................88 4.16.6 Reboot ......................89 4.xvi.vii Password...................... ninety 4.16.8 System Log....................ninety iv.16.ix Statistics ....................... 92 Appendix A: FAQ ....................95 Appendix B: Configuring the PC.................100 Appendix C: Specifications .................104 Appendix D: Glossary ..................105 - 3 -...

• Page eleven: Package Contents

  The following items should be found in your package: TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router Power Adapter for TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router Quick Installation Guide Resources CD for TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router, including: • This Guide • Other Helpful Information Note: Brand certain that the package contains the above items.

• Folio 12: Chapter 1. Introduction

  (SOHO) networks and the users enervating higher networking operation. Incredible Speed The TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router provides up to 300Mbps wireless connection with other 802.11n wireless clients. The incredible speed makes it platonic for treatment multiple data streams at the same time, which ensures your network stable and smooth. The operation of this 802.11n wireless Router will give you lot the unexpected networking experience at...

• Page 13: Conventions

  The Router or TL-WR841N/TL-WR841ND mentioned in this guide stands for TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router without any explanation. Note: The two devices of TL-WR841N and TL-WR841ND are sharing this User Guide. For simplicity, nosotros will take TL-WR841ND for example throughout this Guide. The differences betwixt them are: TL-WR841N Router with 2 fixed antennas.

• Page 14: Panel Layout

  TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide one.4 Panel Layout one.4.one The Front Panel Figure 1-1 Forepart Panel sketch The Router'due south LEDs are located on the forepart panel (View from left to right). Proper name Status Indication Power is off. （Power）...

• Page 15: The Rear Panel

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide 1.4.2 The Rear Console Effigy 1-2 Rear Panel sketch The following parts are located on the rear panel (View from left to right). ON/OFF: The switch for the power. POWER: The Power socket is where you will connect the power adapter. Please utilise the ability adapter provided with this TL-WR841ND 300Mbps Wireless N Router.
• Page sixteen TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide 2) Apply the WPS/RESET button: With the Router powered on, press and concord the WPS/RESET button (more than v seconds) until the SYS LED becomes quick-wink from deadening-flash. And so release the button and wait the Router to reboot to its manufactory default settings.

• Folio 17: Chapter 2. Connecting The Router

  TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide Chapter 2. Connecting the Router two.1 Organisation Requirements Broadband Net Access Service (DSL/Cable/Ethernet) One DSL/Cablevision Modem that has an RJ45 connector (which is not necessary if the Router is connected straight to the Ethernet.)
• Page 18 TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Connect the power adapter to the power socket on the Router, and the other end into an electrical outlet. The Router volition outset to work automatically. Power on your PC and Cablevision/DSL Modem.
• Folio 19 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure two-2 Wall-mount Install Note: The diameter of the screw, 4mm<D<8mm, and the distance of two screws is 123mm. The screw that project from the wall demand around 4mm based, and the length of the spiral need to be at least 20mm to withstand the weight of the product.

• Page twenty: Chapter 3. Quick Installation Guide

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Chapter 3. Quick Installation Guide This chapter volition show you how to configure the basic functions of your TL-WR841ND 300Mbps Wireless Due north Router using Quick Setup Wizard within minutes. three.one TCP/IP Configuration default...

• Page 21: Quick Installation Guide

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 3-2 Failure result of Ping command Delight check the connection following these steps: Is the connection between your PC and the Router correct? Note: The 1/ii/3/4 LEDs of LAN ports which yous link to on the Router and LEDs on your PC'southward adapter should be lit.
• Page 22 TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide After a moment, a login window volition appear, similar to the Effigy iii-4. Enter admin for the User Proper name and Countersign, both in lower case messages. Then click the OK button or press the Enter fundamental.
• Page 23 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Effigy 3-6 WAN Connection Blazon The Router provides Auto-Detect function and supports v popular ways Dynamic IP, Static IP, PPPoE/Russia PPPoE, L2TP/Russia L2TP and PPTP/Russian federation PPTP to connect to the Internet. It's recommended that you brand use of the Auto-Detect part. If you are sure of what kind of connexion type your ISP provides, you tin select the very type and click Adjacent to go on configuring.
• Page 24 TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Effigy 3-7 Quick Setup – MAC Clone 2) If the connectedness type detected is PPPoE/Russia PPPoE, the adjacent screen will announced as shown in Figure 3-eight. Figure iii-viii Quick Setup - PPPoE User Name/Password - Enter the User Name and Password provided by your ISP.
• Page 25 TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide Secondary Connection - It's available merely for PPPoE Connection. If your Internet access provider provides an extra Connexion blazon such every bit Dynamic/Static IP to connect to a local area network, then you can check the radio button of Dynamic/Static IP to activate this secondary connection.
• Folio 26 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure iii-10 Quick Setup - L2TP/Russian L2TP Figure 3-11 Quick Setup - PPTP/Russian PPTP User Proper name/Password - Enter the User Proper noun and Password provided by your Isp. These fields are case sensitive. If you have difficulty with this process, please contact your Isp.
• Page 27 TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide Click Next to continue, the Wireless settings page volition appear as shown in Figure 3-12. Figure 3-12 Quick Setup – Wireless Wireless Radio - The wireless radio can only exist enabled/disabled by using the WIFI ON/OFF switch on the device.
• Page 28 TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase. PSK Password - You tin enter ASCII or Hexadecimal characters. For ASCII, the key tin be made upward of whatever numbers 0 to 9 and whatever messages A to Z, the length should be betwixt 8 and 63 characters.

• Page 29: Chapter 4. Configuring The Router

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Affiliate 4. Configuring the Router This chapter will bear witness each Spider web page's central functions and the configuration way. four.1 Login After your successful login, y'all will see the fifteen main menus on the left of the Web-based utility.

• Page 30: Quick Setup

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-one Router Status 4.iii Quick Setup Please refer to 3.two Quick Installation Guide. This section will guide you to add a new wireless device to an existing network quickly past WPS (Wi-Fi Protected Setup) office.
• Page 31 TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide Figure 4-ii WPS WPS Status - Enable or disable the WPS function here. Current Pin - The current value of the Router's PIN is displayed here. The default PIN of the Router can exist plant in the label attached on the router.
• Page 32 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-three Add A New Device Step two: Printing and hold the WPS push button of the customer device directly. Stride 3: The Wi-Fi Protected Setup LED flashes for two minutes during the Wi-Fi Protected Setup process.

• Page 33: Network

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Annotation: The WPS LED on the Router volition light green for five minutes if the device has been successfully added to the network. The WPS role cannot be configured if the Wireless Function of the Router is disabled.
• Page 34 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-half dozen WAN – Dynamic IP This page displays the WAN IP parameters assigned dynamically by your ISP, including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters from your ISP.
• Page 35 TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide Click the Save button to salvage your settings. If your ISP provides a static or stock-still IP Accost, Subnet Mask, Gateway and DNS setting, select Static IP. The Static IP settings folio volition appear, shown in Figure 4-7.
• Page 36 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide If your Internet service provider provides a PPPoE connection, select PPPoE/Russia PPPoE pick. Then should enter the following parameters (Effigy four-eight): Effigy 4-8 WAN - PPPoE User Name/Password - Enter the User Name and Password provided by your Internet access provider. These fields are case-sensitive.
• Folio 37 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Connect Automatically - The connection can be re-established automatically when information technology was down. Fourth dimension-based Connecting - The connexion volition only be established in the period from the start time to the end time (both are in HH:MM format).
• Page 38 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide not be configured unless you lot are sure it is necessary for your ISP. In virtually cases, leaving these fields blank will work. Internet service provider Specified IP Accost - If your Internet service provider does not automatically assign IP addresses to the Router during login, please click "Use IP accost specified by ISP"...
• Page 39 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide User Name/Password - Enter the User Name and Password provided by your Isp. These fields are case-sensitive. Auth Server - Enter the authenticating server IP accost or host name. Auth Domain - Type in the domain suffix server proper name based on your location.
• Folio xl TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide Effigy 4-11 User Name/Password - Enter the User Proper noun and Password provided by your Internet service provider. These fields are case-sensitive. Dynamic IP/ Static IP - Choose either as you are given by your ISP. Click the Connect push to connect immediately.
• Page 41 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Connect Manually - You tin configure the Router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the Router will disconnect from your Internet connection, and you will not exist able to re-plant your connection automatically equally soon as you attempt to access the Net again.
• Page 42 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-12 PPTP Settings User Name/Password - Enter the User Proper name and Password provided past your Isp. These fields are case-sensitive. Dynamic IP/ Static IP - Choose either as yous are given by your ISP and enter the Isp'due south IP accost or the domain name.

• Page 43: Mac Clone

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Otherwise, enter the number of minutes you lot want to have elapsed before your Internet connectedness terminates. Connect Automatically - Connect automatically afterward the Router is disconnected. To use this option, check the radio button.

• Page 44: Lan

  TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide Figure iv-13 MAC Accost Clone Some ISPs require that y'all register the MAC Address of your adapter. Changes are rarely needed hither. WAN MAC Address - This field displays the electric current MAC address of the WAN port. If your Internet access provider requires yous to annals the MAC address, please enter the correct MAC accost into this field in XX-XX-Twenty-XX-Twenty-XX format (Ten is any hexadecimal digit).

• Folio 45: Wireless

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Subnet Mask - An address code that determines the size of the network. Normally use 255.255.255.0 as the subnet mask. Note: If yous change the IP Address of LAN, you must use the new IP Address to log in the Router.
• Page 46 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Effigy iv-16 Wireless Settings Wireless Network Proper name - Enter a value of up to 32 characters. The same proper name of SSID (Service Set Identification) must be assigned to all wireless devices in your network.
• Page 47 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Mode - Select the desired mode. The default setting is 11bgn mixed. 11b simply - Select if all of your wireless clients are 802.11b. 11g but - Select if all of your wireless clients are 802.11g.

• Page 48: Wireless Security

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-17 SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a client. Y'all can also use the search part to select the SSID to join.
• Page 49 TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide Figure 4-xviii Wireless Security Disable Security - If you practice non want to use wireless security, check this radio button. But it'southward strongly recommended to choose i of the following modes to enable security.
• Page 50 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Effigy 4-xix • Wireless Password - You can enter ASCII characters between 8 and 63 characters or eight to 64 Hexadecimal characters. • Grouping Fundamental Update Period - Specify the grouping key update interval in seconds. The value should exist 30 or above.

• Page 51: Wireless Mac Filtering

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure iv-21 • Blazon - you can choose the blazon for the WEP security on the drop-downward list. The default setting is Automatic, which can select Shared Key or Open Organization authentication type automatically based on the wireless station'southward adequacy and request.
• Page 52 TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide Figure iv-22 Wireless MAC Filtering To filter wireless users by MAC Accost, click Enable. The default setting is Disabled. MAC Address - The wireless station'southward MAC address that you want to filter. Condition - The condition of this entry, either Enabled or Disabled.

• Page 53: Wireless Avant-garde

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Modify the information. Click the Salvage push button. Click the Enable All button to make all entries enabled Click the Disable All push button to make all entries disabled. Click the Delete All push button to delete all entries.
• Page 54 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure four-24 Wireless Avant-garde Transmit Power - Here you can specify the transmit power of Router. Yous tin can select Loftier, Middle or Depression which you would similar. High is the default setting and is recommended.

• Page 55: Wireless Statistics

  TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Enabled AP Isolation - This function tin isolate wireless stations on your network from each other. Wireless devices volition exist able to communicate with the Router merely not with each other. To apply this function, check this box. AP Isolation is disabled past default.

• Page 56: Dhcp

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide four.7 DHCP Effigy 4-26 The DHCP menu There are 3 submenus under the DHCP bill of fare (shown in Figure 4-26), DHCP Settings, DHCP Customer List and Address Reservation. Click any of them, and you lot volition be able to configure the corresponding function.

• Page 57: Dhcp Client List

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide time is upwardly, the user volition be automatically assigned a new dynamic IP accost. The range of the time is ane ~ 2880 minutes. The default value is 120 minutes. Default Gateway - (Optional.) It is suggested to input the IP address of the LAN port of the Router.
• Folio 58 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Effigy four-29 Address Reservation MAC Accost - The MAC accost of the PC for which y'all desire to reserve an IP address. Reserved IP Accost - The IP accost reserved for the PC past the Router.

• Page 59: Forwarding

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide four.eight Forwarding Figure 4-31 The Forwarding card There are four submenus under the Forwarding menu (shown in Figure 4-31), Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the respective function.
• Page sixty TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide To gear up a virtual server entry: Click the Add New… button, the adjacent screen volition popular-up as shown in Effigy iv-33. Select the service port you want to apply from the Mutual Service Port list. If the Mutual Service Port list does not take the service that you lot want to utilize, type the service port number or service port range in the Service Port box.

• Page 61: Port Triggering

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide iv.8.2 Port Triggering Choose card "Forwarding → Port Triggering", you can view and add together port triggering in the screen as shown in Figure 4-34. Some applications crave multiple connections, like Internet games, video conferencing, Internet calling and so on.

• Page 62: Dmz

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either TCP, UDP, or All. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list, either TCP or UDP, or All.

• Page 63: Upnp

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide function disabled and should have a new static IP Address assigned to it because its IP Accost may be changed when using the DHCP function. Figure 4-36 DMZ To assign a estimator or server to be a DMZ server: Check the Enable radio button.

• Page 64: Security

  TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide App Description - The description provided past the awarding in the UPnP request. • External Port - The external port the Router opens for the awarding. • Protocol - The type of protocol the Router opens for the application.
• Page 65 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Effigy four-39 Bones Security Firewall - A firewall protects your network from the outside globe. Hither yous can enable or disable the Router's firewall. SPI Firewall - SPI (Stateful Bundle Inspection, also known as dynamic package filtering) helps to forestall cyber attacks by tracking more state per session.

• Page 66: Advanced Security

  TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide protocols such as FTP, TFTP, H323 etc. FTP ALG - To permit FTP clients and servers to transfer data beyond NAT, go on the default Enable. TFTP ALG - To allow TFTP clients and servers to transfer data across NAT, keep the default Enable.

• Page 67: Local Direction

  TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide DoS Protection - Denial of Service protection. Check the Enable or Disable button to enable or disable the DoS protection function. Only when information technology is enabled, will the flood filters be enabled. Notation: Dos Protection will take upshot only when the Traffic Statistics in "System Tool →...

• Page 68: Remote Direction

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure four-41 Local Management By default, the radio button "All the PCs on the LAN are allowed to access the Router's Web-Based Utility" is checked. If you want to allow PCs with specific MAC Addresses to admission the Setup page of the Router's Web-Based Utility locally from inside the network, check the radio push "Simply the PCs listed tin can browse the built-in spider web pages to perform Administrator...

• Page 69: Parental Control

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure iv-42 Remote Direction Web Management Port - Web browser access commonly uses the standard HTTP service port 80. This Router's default remote management web port number is 80. For greater security, you can change the remote management web port to a custom port past entering that number in the box provided.
• Page lxx TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-43 Parental Command Settings Parental Control - Check Enable if you desire this office to take effect, otherwise bank check Disable. MAC Address of Parental PC - In this field, enter the MAC address of the decision-making PC, or you can make utilize of the Copy To Above button below.
• Page 71 TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Click the Salve button. Click the Enable All button to enable all the rules in the list. Click the Disable All button to disable all the rules in the listing. Click the Delete All button to delete all the entries in the table.

• Folio 72: Access Command

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Enter 00-eleven-22-33-44-AA in the MAC Address of Children's PC field. Enter "Allow Google" in the Website Description field. Enter "www.google.com" in the Allowed Website Proper name field. Select "Schedule_1" you create just now from the Effective Time drop-downwards list.
• Page 73 TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Figure 4-47 Access Control Rule Direction Enable Internet Access Control - Select the cheque box to enable the Cyberspace Access Control function, and then the Default Filter Policy tin take effect. Dominion Name - Here displays the name of the rule and this name is unique.
• Folio 74 TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Figure iv-48 Quick Setup – Create a Host Entry Mode - Here are two options, IP Address and MAC Address. You tin can select either of them from the drop-down list. Host Description - In this field, create a unique description for the host (e.g. Host_1).
• Page 75 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Target Description - In this field, create a clarification for the target. Note that this description should be unique (due east.g. Target_1). If the IP Address is selected, you will see the post-obit items: IP Address - Enter the IP address (or accost range) of the target (targets) in dotted-decimal format (e.grand.
• Page 76 TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide Fourth dimension - Select "24 hours", or specify the Starting time Time and Stop Time yourself. Start Time - Enter the start fourth dimension in HHMM format (HHMM are 4 numbers). For example 0800 is 8:00.
• Page 77 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Select a schedule from the Schedule drop-downwards list or cull "Click Here To Add New Schedule". In the Status field, select Enabled or Disabled to enable or disable your entry. Click the Salvage button.

• Page 78: Host

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide • Click Save to complete the settings. And then you will get dorsum to the Access Control Rule Management page and see the following listing. 4.eleven.2 Host Cull menu "Access Control → Host", yous tin view and set up a Host list in the screen every bit shown in Figure 4-53.

• Folio 79: Target

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure iv-54 Add or Modify a Host Entry Figure four-55 Add or Modify a Host Entry For example: If you desire to restrict the internet activities of host with MAC address 00-11-22-33-44-AA, you should first follow the settings below: Click Add New...
• Page 80 TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Figure iv-56 Target Settings Target Description - Here displays the description virtually the target and this description is unique. Data - The target can be IP accost, port, or domain name. Change - To modify or delete an existing entry.
• Folio 81 TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide Figure four-57 Add or Alter an Access Target Entry Figure four-58 Add together or Modify an Access Target Entry For example: If you want to restrict the internet activities of host with MAC address 00-11-22-33-44-AA in the LAN to access www.google.com only, y'all should first follow the...

• Folio 82: Schedule

  TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide iv.11.four Schedule Choose menu "Access Command → Schedule", you tin can view and set up a Schedule list in the adjacent screen as shown in Figure iv-59. The Schedule list is necessary for the Access Control Rule.

• Folio 83: Avant-garde Routing

  TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Figure iv-60 Advanced Schedule Settings For example: If you want to restrict the internet activities of host with MAC address 00-xi-22-33-44-AA to access www.google.com only from 18:00 to xx:00 on Saturday and Lord's day, yous should first follow the settings below: Click Add New...

• Page 84: Static Routing

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide 4.12.1 Static Routing Choose carte "Advanced Routing → Static Routing", and you can configure the static road in the next screen, shown in Figure iv-62. A static route is a pre-determined path that network information must travel to achieve a specific host or network.

• Page 85: System Routing Table

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries. Click the Previous button to view the data in the previous screen, click the Next push to view the information in the side by side screen.

• Folio 86: Control Settings

  TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide 4.thirteen.i Control Settings Choose card "Bandwidth Command → Control Settings", you tin configure the Egress Bandwidth and Ingress Bandwidth in the side by side screen. Their values you configure should be less than 100000Kbps. For optimal control of the bandwidth, please select the right Line Blazon and ask your ISP for the total bandwidth of the egress and ingress.

• Page 87: Ip & Mac Binding Setting

  TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide Ingress bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0. Enable - This displays the status of the rule. Change - Click Alter to edit the rule. Click Delete to delete the rule.
• Page 88 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-69 Bounden Settings MAC Accost - The MAC address of the controlled computer in the LAN. IP Address - The assigned IP address of the controlled calculator in the LAN. Bind - Check this selection to enable ARP bounden for a specific device.

• Page 89: Arp List

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Click Modify or Delete as desired on the Change column. To find an existing entry, follow the steps below. Click the Find push as shown in Figure four-69. Enter the MAC Address or IP Address.

• Page 90: Dynamic Dns

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Delete - Delete the particular. Click the Bind All button to bind all the current items, available afterward enable. Click the Load All button to load all items to the IP & MAC Binding listing.

• Page 91: Dyndns.org Ddns

  TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide Figure 4-73 Comexe.cn DDNS Settings To set up for DDNS, follow these instructions: Blazon the Domain Name received from your dynamic DNS service provider. Type the User Name for your DDNS account. Type the Password for your DDNS account.

• Page 92: No-Ip.com Ddns

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure 4-74 Dyndns.org DDNS Settings To set up for DDNS, follow these instructions: Type the User Name for your DDNS business relationship. Type the Password for your DDNS account. Type the Domain Name yous received from dynamic DNS service provider here.

• Page 93: System Tools

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide To gear up up for DDNS, follow these instructions: Blazon the User Name for your DDNS account. Blazon the Password for your DDNS account. Type the Domain Name yous received from dynamic DNS service provider.
• Folio 94 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Effigy 4-77 Time settings Time zone - Select your local time zone from this drop-downwards list. Date - Enter your local date in MM/DD/YY into the correct blanks. Time - Enter your local time in HH/MM/SS into the right blanks.

• Page 95: Diagnostic

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide To set fourth dimension automatically: Select your local time zone. Enter the accost or domain of the NTP Server I or NTP Server 2. Click the Get GMT button to get system fourth dimension from Internet if y'all have connected to the Internet.
• Page 96 Domain Name System (DNS) queries. IP Address/Domain Name - Type the destination IP accost (such as 192.168.0.1) or Domain name (such equally http://www.tp-link.com). Pings Count - The number of Ping packets for a Ping connexion.

• Page 97: Firmware Upgrade

  two. Type the path and file name of the update file into the File field. Or click the Browse button to locate the update file. 3. Click the Upgrade push button. Note: one) New firmware versions are posted at http://www.tp-link.com and can be downloaded for costless. - 87 -...

• Page 98: Factory Defaults

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide In that location is no demand to upgrade the firmware unless the new firmware has a new feature you want to utilise. Still, when experiencing problems acquired by the Router rather than the configuration, you can endeavor to upgrade the firmware.

• Page 99: Reboot

  TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Figure 4-82 Backup & Restore Configuration Click the Fill-in button to save all configuration settings as a fill-in file in your local computer. To upgrade the Router's configuration, follow these instructions. • Click the Browse… button to locate the update file for the Router, or enter the exact path to the Setting file in the text box.

• Folio 100: Password

  TL-WR841N/TL-WR841ND 300Mbps Wireless Due north Router User Guide • Update the configuration with the file (system volition reboot automatically. 4.16.vii Password Choose menu "System Tools → Password", you can alter the mill default user name and countersign of the Router in the side by side screen as shown in Effigy 4-84.
• Page 101 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Effigy 4-85 System Log Auto Mail service Feature - Indicates whether auto mail feature is enabled or not. Post Settings - Gear up the receiving and sending mailbox accost, server address, validation data as well every bit the timetable for Auto Mail Characteristic, every bit shown in Figure 4-86.

• Folio 102: Statistics

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide From - Your mail box address. The Router would connect it to send logs. To - Recipient'due south address. The destination mailbox where the logs would be received. SMTP Server - Your smtp server. It corresponds with the mailbox filled in the From field.
• Folio 103 TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide Figure 4-87 Statistics Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click the Enable button. If disabled, the office of DoS protection in Security settings volition disabled.
• Folio 104 TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide The number of UDP packets transmitted to the WAN per 2d at the UDP Tx specified Packets Statistics interval. It is shown like "electric current transmitting rate / Max transmitting charge per unit". The number of TCP SYN packets transmitted to the WAN per 2d at the specified Packets Statistics interval.

• Page 105: Appendix A: Faq

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Appendix A: FAQ How practice I configure the Router to access Net by ADSL users? First, configure the ADSL Modem configured in RFC1483 bridge model. Connect the Ethernet cablevision from your ADSL Modem to the WAN port on the Router. The telephone cord plugs into the Line port of the ADSL Modem.
• Page 106 TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide "WAN" submenu. On the WAN page, select "Dynamic IP" for "WAN Connectedness Type", stop by clicking Save. Some ISPs crave that you annals the MAC Address of your adapter, which is connected to your cable/DSL Modem during installation. If your Internet service provider requires MAC register, log in to the Router and click the "Network"...
• Page 107 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure A-5 Add or Alter a Virtual server Entry Note: Your opposite side should call your WAN IP, which is displayed on the "Status" page. How to enable DMZ Host: Log in to the Router, click the "Forwarding" menu on the left of your browser, and click "DMZ"...
• Page 108 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure A-7 Basic Security I want to build a WEB Server on the LAN, what should I do? Because the Web Server port 80 will interfere with the WEB direction port 80 on the Router, you must change the WEB direction port number to avoid interference.
• Page 109 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide "Service Port", and your IP accost next to the "IP Accost", bold 192.168.0.188 for an case, remember to Enable and Save. Effigy A-ix Virtual Servers Figure A-10 Add or Modify a Virtual server Entry The wireless stations cannot connect to the Router.

• Page 110: Appendix B: Configuring The Pc

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Appendix B: Configuring the PC In this department, we'll innovate how to install and configure the TCP/IP correctly in Windows XP. First brand sure your Ethernet Adapter is working, refer to the adapter's manual if necessary.
• Page 111 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Figure B-two The following TCP/IP Properties window will display and the IP Accost tab is open on this window by default. At present you have two ways to configure the TCP/IP protocol below: Setting IP accost automatically...
• Page 112 TL-WR841N/TL-WR841ND 300Mbps Wireless North Router User Guide Figure B-iii Note: For Windows 98 Bone or earlier, the PC and Router may need to exist restarted. Setting IP accost manually Select Utilize the following IP address radio button. And the following items available If the Router's LAN IP accost is 192.168.0.1, specify the IP address equally 192.168.0.x (x is...
• Page 113 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Now click OK to keep your settings. - 103 -...

• Page 114: Appendix C: Specifications

  TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide Appendix C: Specifications General IEEE 802.3, IEEE 802.3u, IEEE 802.11b, IEEE 802.11g and IEEE Standards 802.11n Protocols TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP One 10/100M Automobile-Negotiation WAN RJ45 port, 4 ten/100M Ports Auto-Negotiation LAN RJ45 ports supporting Auto MDI/MDIX 10BASE-T: UTP category 3, four, five cable (maximum 100m) Environmental impact assessment/TIA-568 100Ω...

• Folio 115: Appendix D: Glossary

  TL-WR841N/TL-WR841ND 300Mbps Wireless Northward Router User Guide Appendix D: Glossary 802.11n - 802.11n builds upon previous 802.eleven standards by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmitter and receiver antennas to allow for increased data throughput via spatial multiplexing and increased range by exploiting the spatial diversity, peradventure through coding schemes like Alamouti coding.
• Page 116 TL-WR841N/TL-WR841ND 300Mbps Wireless N Router User Guide hosts to the Internet over an always-on connectedness by simulating a punch-upwards connection. SSID - A Service Set Identification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area network. For the wireless devices in a network to communicate with each other, all devices must exist configured with the same SSID.

Source: https://www.manualslib.com/manual/721749/Tp-Link-Tl-Wr841n.html

Posted by: ruizwarsted.blogspot.com

Share this post